Linux Format forums

by **LeeNukes** » Thu Feb 24, 2011 9:37 pm

http://www.ebuyer.com/product/253305

Bargain in my opinion.

£270 with £100 rebate cheque back (despite it saying cash back, but I'd rather they post it as a cheque then cash).

HP ProLiant MicroServer, 4 bays upto 8TB storage (with 4 2TB drives)
1.3GHz AMD CPU
1GB of RAM
250GB SATA 300 drive included

Rebate runs out Feb 28th, it needs to be invoiced and delivered before then. I paid extra for next day delivery from Ebuyer which was the cheapest place I found to get the server.

by **Rhakios** » Fri Feb 25, 2011 12:00 am

Nice little box. I'd be tempted if I wasn't already using a Revo, with 1.5 TB of external storage, in a similar role.

by **LeeNukes** » Fri Feb 25, 2011 10:24 pm

Revo those 1 drive jobbies?

by **Rhakios** » Sat Feb 26, 2011 4:04 am

One drive inside, eSATA port and umpteen USB ports. How many do you need? USB and eSATA are still faster than ethernet, so they'll do.

by **LeeNukes** » Sat Feb 26, 2011 3:32 pm

Yeah this has esata, 4 drive bays and 6 USB sockets.

Similar price I would assume too as I think it was in the £150-200 price range when I was looking at a Revo.

Wrote up some benchmark results: http://www.leenukes.co.uk/?p=381

by **LeeNukes** » Sun Feb 27, 2011 8:54 pm

Just confirmed in its current configuration my server uses 29 watts idle. Once I put a few more drives in I expect that to go up a bit. Not sure what a SATA II drive uses in watts. Maybe 5 watts each?

by **ollie** » Mon Feb 28, 2011 8:45 am

LeeNukes wrote:Just confirmed in its current configuration my server uses 29 watts idle. Once I put a few more drives in I expect that to go up a bit. Not sure what a SATA II drive uses in watts. Maybe 5 watts each?

I believe it's between 7 and 17 watts during operation depending on the actual tasks (seek, read or write) and the hard drive model/size. I have seen 30 watts being quoted for Hitachi drives during start up :shock:

by **LeeNukes** » Mon Feb 28, 2011 7:34 pm

The drives I'm looking at are 5.4 watts read/write and 0.4 standby.

So another 16.2 watts or there abouts added onto my server brings it to around 45.2 watts for 1.8TB storage (RAID 5) and a 250GB drive just for the OS (probably don't need this on RAID so much.)

by **bobthebob1234** » Wed Mar 02, 2011 12:25 am

how does one go about finding these figures for ones self?

by **LeeNukes** » Thu Mar 03, 2011 9:35 pm

which figures? Per drive or server usage?

If the latter, I used one of these:

http://www.maplin.co.uk/plug-in-electri ... 3&t=module

Home About Buy online Blog Archives Newsletters Subscribe Contact

Linux Format forums

Bought a new home server

Bought a new home server

Who is online